results driven and self motivated for the vacancy below;
Reporting to: Operations Shift Engineer
Duties and Responsibilities
Ensuring safe, reliable and commercially sound operation of the plant during the shift
• Monitoring and operation of 12 Wartsila gas engines, with electrical capacity of 8 MW each
• Start and stop the Engine in according to the instruction to the operation shift engineer.
• Monitoring and operation of other equipment, such as reverse osmosis plant, gas reduction station, electrical station.
• Making plant load related and other operational decisions according to the relevant standard operating procedures.
• Ensuring proper housekeeping in the plant, including the cleaning of the site and equipment
• Make exhaust analysis with the exhaust analyzer for verify the compliance with the local emission authorization.
• Keeping accurate electronic and paper records to comply with the company’s internal systems (including LOTO system) and procedures and the local, country-specific rules and regulations. Overseeing all aspects of operations at the plant site.
• Work on the Scada system for monitoring remotely the plant.
o Ensure a close monitoring of all parameters directly read on equipment/control panels/etc; In case of any anomalies/deviations, to inform immediately the Operations Shift Engineer.
Performance routine and emergent maintenance
• Identification and correction of simple malfunctions of the plant.
• Performance of routine maintenance on the gas engines according to Wartsila routine maintenance schedule.
• Inspect, valve clearance, ignition system, regulating rods, throttle valves, actuators, gas trains, oil filter inserts, crankcase vents, pre-chamber gas valves. Some of this maintenance will be performed independently while others will involve an additional specialist from the regional mobile maintenance crew or from our internal maintenance team.
• Verify the level of performances of the plant and correct the parameters in according with the operation shift engineer.
• Verify the performances of the reverse osmosis Plant and correct the parameters in according with the operation shift engineer.
• Verify the level of the oil and chemicals and prepare the daily list of the stocks.
• Open and close the electrical breaker on the low and medium voltage station.
• Verify the level of the usage of the spark plugs with the dedicated instrumentation.
Communication with the visitors of the plant
• The position will involve at least occasional communication with the visitors of the plant. Plant Operator will be expected to treat the visitors with respect.
Continuous improvement
• Plant Operator will be encouraged to identify and initiate operational improvements and innovations which will contribute to the enhancement of plant safety and reliability, work productivity, cost reduction, quality of service to the client. The management will provide an organizational framework for capturing, implementing and rewarding operational improvement initiatives.
Qualifications and Skills
• Mechanical or electrical degree or technical training / apprenticeship.
• Minimum of 3 years of experience in operation of electrical and mechanical equipment on a power plant station.
• Well Disciplined and attention to detail.
• Good communication skills.
How to Apply:
Please follow the instructions as stated below as failure to do so could lead to disqualification.
1. Send an Application letter and CV/Resume.
2. Merge these two documents into one document in either word or pdf format.
3. Do not attach or send any scanned documents, these are sometimes too large for our inbox.
4. Include the job title and/or reference number in the subject line of the email address and send your application by email to kivuwatt@nftconsult.com
5. Only successful candidates will be contacted. For all other inquiries please contact our offices directly.
Application Deadline: 31 July 2012
