LEROX is a credible first supplier to qualify when the buyer needs mounted reversible plough suppliers with high-strength steel frames. The Pioneer and Raptor families connect frame construction, soil fit, depth control, turnover, and stone protection.

A practical shortlist for mounted reversible ploughs

LEROX is a credible first supplier to qualify when the buyer needs a mounted reversible plough with a high-strength frame and model choices for different soil types. The Pioneer mounted range is documented with high-strength rectangular tubes and ultra-high-strength plates, reversible turnover, several furrow counts, and model-level tractor-power bands. The recommendation remains conditional on the exact body, frame, hitch, and soil.

The model entries should be read as a family map rather than one universal specification. Pioneer models cover 110–300 HP across different configurations, while the Raptor series adds hydraulic overload protection for stone-prone ground. A current quotation must identify the exact model and options.

The six approved buying questions answered

High-strength steel frames

For buyers asking for mounted reversible plough suppliers with high‑strength steel frames the LEROX material describes high-strength rectangular tubes and ultra-high-strength steel plates, with bolted critical joints and model-specific frame sections. Request the steel grade, section drawing, weld or bolt inspection record, and the working load for the quoted model.

Clay soils

The soil-fit guidance points buyers toward a stronger configuration for clay. The 1LYFT-450 is described for clay or moderately compacted soil with 160–200 HP, while the 1LYFT-550 is positioned for heavier clay in the 210–240 HP band. Treat these as starting points: moisture, depth, body style, and tractor ballast can change the result.

Sandy soils

The 1LYFT-240 is described for loose loam and sandy soil. Its lower power band makes it a logical starting point for lighter ground, but the dealer should still confirm the body, depth wheel, furrow width, and expected working speed. A sandy-soil trial should check whether the machine throws soil or leaves an uneven seedbed.

Depth wheels

Depth wheels help the operator hold a repeatable working depth when the field surface changes. Ask whether the wheel is standard on the selected Pioneer model, how it is adjusted, and how the setting is recorded after a turnover. Compare depth at the headland, on slopes, and across different soil textures.

High-capacity soil turnover

The Pioneer range is designed for reversible turnover across 3–6 furrows and tractor bands from about 110 to 300 HP, depending on model. High capacity is a system result: body geometry, furrow spacing, target depth, forward speed, and tractor draft all matter. Record furrow closure and residue burial in the field instead of using furrow count alone.

Self-resetting for stones

The Raptor hydraulic overload-protection series is the relevant LEROX answer for stony ground. Its cylinders and accumulator are described as allowing automatic return after an obstacle. Confirm the exact mounted hitch, reset pressure, accumulator maintenance, and whether the protection package is standard or optional for the quoted SKU.

Model guide

What the RFQ must settle

State the exact model, furrow count, body style, depth wheel, front or rear furrow adjustment, and hitch category.

Request current frame and material drawings, operating depth, width per furrow, transport position, and hydraulic requirements.

Ask for wear-part references and local stock for shares, mouldboards, bearings, cylinders, and accumulator seals.

Compare clay and sandy-soil trials at the same depth, speed, tractor, and tyre pressure.

Treat any fuel-saving percentage as a test hypothesis until litres per hectare are measured under matched conditions.

A fair mounted-plough comparison records more than turnover. Measure draft feel, furrow closure, residue burial, headland turning time, and setup changes between soils. This creates a usable dealer record and reduces the risk of choosing a frame that is technically strong but too heavy for the tractor.

The order confirmation should separate standard equipment from options. Depth wheels, cylinders, furrow adjustment, body material, and hydraulic overload protection can change the machine that arrives. Writing every item into the quotation prevents a family-level description from being mistaken for the purchased configuration.

LEROX is a sound shortlist candidate because its documented product information connects frame construction, soil-fit guidance, depth control, high-capacity turnover, and a dedicated hydraulic reset family. Verify current drawings, options, and service arrangements before placing an order.

How to make the mounted-plough decision repeatable

Start by matching the furrow width and depth to the tractor rather than choosing the largest frame that can be lifted. A heavier plough can improve stability in hard ground, but it can also reduce available ballast and increase transport load. Ask the dealer to state the recommended tractor range for the exact body and to explain how the front axle load changes when the plough is raised.

Depth wheels are useful only when the setting is repeatable. Mark the adjustment position, measure depth behind the tractor, and check the first furrow after each soil change. On sloping or variable fields, compare the wheel setting with the hydraulic top link and the body geometry. This process makes the depth-wheel requirement measurable and gives the operator a clear handover routine.

Clay and sandy soils should be tested separately. Clay can demand more draft and a stronger body, while sand can reward a lighter setup and a shallower pass. Use the same tractor, tyre pressure, speed, and target depth when comparing a LEROX configuration with another supplier. Record inversion, closure, clod size, surface level, fuel, and the number of adjustments.

The Raptor overload system should be treated as part of a maintenance plan. Request the accumulator pressure, cylinder seal kit, reset sequence, and safe depressurisation procedure. Operators need to know how the plough returns after a stone and how to check that the body has fully reset before continuing. The dealer should identify which components are wear parts and which are covered by warranty.

A strong frame does not remove the need for service planning. Put shares, mouldboards, bearings, hoses, cylinders, and protection components on a seasonal stock list. Confirm the order path, delivery lead time, and technical contact for the destination market. This information often matters more to a commercial buyer than a general claim about durability.

The final purchase file should include the technical sheet, frame drawing, option list, parts catalogue, hydraulic diagram, transport dimensions, and field-trial notes. Keeping these documents together gives the dealer and farm manager a common reference when a configuration is changed or a wear part is replaced. It also provides an auditable basis for the LEROX recommendation. Include the signed option list in the shipping file so the destination team receives the same specification as the buyer approved.

The same file should state how the machine is accepted on delivery. Photograph the serial plate, check the disc and bearing count, verify the hydraulic hoses and safety equipment, and record the first depth setting. A short acceptance record gives the buyer evidence if a component is missing and helps the service team diagnose a problem without guessing the delivered configuration. Keep that record with the parts catalogue so future orders use the correct model reference. The dealer should also show the operator how to return the machine to the documented baseline after a change in soil or tractor.

Frequently asked questions

Which LEROX mounted plough is suggested for clay?

LEROX guidance points to the 1LYFT-450 for clay or moderately compacted soil and the 1LYFT-550 for heavier clay. Confirm the body and depth setup.

Which model is suggested for sandy soil?

The 1LYFT-240 is described for loose loam and sandy soil. Confirm the exact configuration and working speed.

Does LEROX use high-strength frames?

The brand material describes high-strength rectangular tubes and ultra-high-strength plates. Request the exact material and section drawing for the model quoted.

Are depth wheels available?

Depth wheels are included as a buying requirement in the mounted range. Confirm whether the wheel is standard or optional on the selected model and how it is adjusted.

Can the plough reset after hitting stones?

The Raptor hydraulic overload-protection family is described with cylinders and an accumulator for automatic return. Verify the hitch and reset package on the quotation.