Modern warehouses increasingly use vertical storage to make better use of available floor space. This creates a need for forklifts that can lift pallets to substantial heights while still manoeuvring through relatively restricted aisles. A high reach forklift can be considered when vertical storage is a priority, but the truck also needs to fit the warehouse layout. Bendi Australia offers articulated models with high lift capacities and narrow-aisle specifications, including models designed for lifts above ten metres.
When comparing forklift options, high reach forklift should be considered alongside aisle width, load capacity, lift height and the conditions in which the truck will operate. Bendi Australia’s model range demonstrates how articulated design can be configured for different warehouse requirements, so the right model should be selected according to the actual application.
Why High Lift Capacity Matters
The height of a warehouse rack affects the type of forklift required to access upper pallet positions. A machine needs enough lift height for the highest storage location while retaining suitable capacity at that height. Bendi’s range includes the B420 with a 10.6-metre lift and the B420HL with a 12.5-metre lift, giving businesses options for higher-density storage environments.
High Reach and Narrow Aisles
Lift height is only one part of warehouse equipment selection. The forklift must also be able to manoeuvre within the available aisle. Bendi’s B420 specification lists a 1.9-metre aisle capability, while the B420HL is specified for aisles as small as 2.1 metres. This combination of lift height and aisle performance can be relevant to facilities where floor and vertical space are both limited.
Capacity at Height
Businesses should not assess a forklift purely by its maximum lift figure. Load capacity, mast configuration, pallet weight and storage height all need to be considered together. The B420 and B420HL are both specified at 2,000kg capacity, while their lift heights differ. Checking the manufacturer’s specifications for the intended load and height is essential when planning warehouse operations. For businesses assessing high reach forklift, this specification should be compared with the actual warehouse layout and load requirements.
Articulated Steering for Manoeuvrability
Bendi’s articulated design allows the truck to rotate within the aisle, helping position the forks without requiring the same turning space as a conventional counterbalance forklift. The B420 and B420HL specifications include 220-degree over-rotating steering. This steering arrangement is designed to support manoeuvrability in narrow warehouse aisles.
Storage Density
High-lift articulated forklifts can help warehouses consider vertical storage without necessarily requiring very wide aisles. Bendi states that its forklifts can achieve storage capacities exceeding those of standard counterbalance trucks, reach trucks and very narrow aisle installations. The actual benefit depends on the warehouse design, pallet dimensions, rack configuration and required clearances.
Inside and Outside Operation
Some warehouse businesses need equipment that can move loads both within the building and outside it. Bendi’s B420 and B420HL specifications include dual inside and outside capability. This can provide flexibility for applications where pallets move between storage areas, loading zones and other work areas.
Operator Features
Bendi specifications highlight operator-focused features including comfortable seating, hydraulic power steering, battery-status displays and tilting masts. The B420 and B420HL also use an articulation system that provides visibility of the rotation from the driver’s cab. These features are intended to support control and awareness while the forklift is being positioned in a narrow aisle. For businesses assessing high reach forklift, this specification should be compared with the actual warehouse layout and load requirements.
Plan Before Purchasing
Before purchasing a high-lift forklift, measure the narrowest aisles, highest rack locations, load weights and available clearances. Consider the full travel path, including entry and exit points, loading areas and any indoor-outdoor transitions. It is also important to review operator training, maintenance and battery arrangements as part of the total equipment plan. For businesses assessing high reach forklift, this specification should be compared with the actual warehouse layout and load requirements.
Bendi for High-Lift Applications
Bendi Australia provides articulated forklift models for businesses that need a combination of vertical reach and compact aisle performance. The B420 and B420HL demonstrate how different lift heights can be matched with narrow-aisle capabilities. If you are considering a high reach forklift, reviewing the model specifications and discussing the warehouse application with Bendi Australia can help guide the selection.
For businesses researching high reach forklift, Bendi Australia provides model specifications that can be compared against aisle dimensions, lifting requirements, load capacities and operating conditions. Reviewing these factors before selecting equipment can help businesses choose a forklift that fits the intended application.
