R and M Tornado vapes are among the most popular disposable vapes due to their high puff count, rechargeable battery, and smooth flavors. However, many users may need to open their vape for various reasons, such as refilling e-liquid, fixing a charging issue, or troubleshooting airflow problems.
In this guide, I’ll walk you through the steps to safely open an R and M Tornado vape while avoiding damage.
Is It Safe to Open an R and M Tornado Vape?
Before proceeding, it’s essential to understand that R and M Tornado vapes are designed to be disposable. Opening them can be risky because:
- Battery Safety – The built-in lithium-ion battery can be dangerous if punctured or short-circuited.
- Leakage Risk – Mishandling the vape could cause e-liquid spills.
- Device Damage – These vapes are not meant to be taken apart, so there is a risk of breaking the internal components.
That said, if you need to open your R and M Tornado vape for troubleshooting or refilling, follow the steps carefully.
Tools You’ll Need
Before opening your vape, gather the following tools:
- Small flathead screwdriver or tweezers
- Pliers (optional)
- Paper towels (to clean up any e-liquid spills)
- Gloves (to protect your hands from e-liquid exposure)
How to Open R and M Tornado Vape
Step 1: Remove the Bottom Cap
The bottom cap of the R and M Tornado vape houses the rechargeable port and airflow system. Here’s how to remove it:
- Hold the vape firmly. Make sure you have a good grip to avoid slipping.
- Use a flathead screwdriver or tweezers. Gently pry under the bottom cap where the charging port is located.
- Slowly lift the cap. Apply steady pressure to pop it off without breaking the plastic.
Once the cap is off, you will see the battery and wiring.
Step 2: Take Out the Internal Components
After removing the bottom cap, you’ll need to extract the inner components carefully.
- Gently pull on the internal assembly. The battery, e-liquid tank, and coil are connected inside a plastic casing.
- Use tweezers or pliers if necessary. If the components are stuck, lightly wiggle them out using a tool.
- Be cautious with the battery. Avoid bending or puncturing it, as this can cause a short circuit or leakage.
At this point, you should see the e-liquid tank, cotton wicking, and coil.
Step 3: Refilling the Vape (Optional)
If your goal is to refill the vape, follow these steps:
- Locate the cotton wick. This is where the e-liquid is absorbed into the coil.
- Add a few drops of e-liquid. Use a syringe or dropper to carefully saturate the cotton without overfilling.
- Reassemble the vape. Once refilled, put the internal components back into the outer shell.
Note: Overfilling can cause leakage or flooding, leading to poor performance.
Step 4: Fixing Airflow Issues
If you’re opening your vape due to airflow issues, check for:
- Blocked airflow holes – Use a needle or toothpick to clear any clogs.
- Burnt cotton wick – If the wick is dry or burnt, refilling won’t fix it, and you may need a new vape.
- Loose coil connections – Ensure the coil is properly seated for better vapor production.
Step 5: Reassemble the Vape
After making any necessary adjustments:
- Slide the internal components back in. Make sure they align correctly inside the shell.
- Snap the bottom cap back on. Press firmly until it clicks into place.
- Test the vape. Charge it if necessary and take a small puff to check if it works properly.
Troubleshooting Common Problems After Opening
1. Vape Not Hitting After Reassembly
- Ensure the battery wires are still connected.
- Check if the coil is in place and properly soaked.
- Make sure the bottom cap is securely attached.
2. Charging Issues
- Inspect the charging port for debris.
- Ensure the battery is properly seated inside the housing.
3. Burnt or Weak Flavor
- The coil might be burnt out; if so, the vape is no longer usable.
- Let the wick soak for a few minutes after refilling.
Final Thoughts: Should You Open an R and M Tornado Vape?
Opening an R and M Tornado vape should only be done if absolutely necessary. Since these vapes are meant to be disposable, tampering with them can lead to issues like leaks, shorts, or malfunctions.
If your vape stops working and cannot be fixed, it’s best to replace it with a new one. However, if you’re comfortable handling small electronics and understand the risks, opening it for minor fixes or refilling may be an option.
