Figure 1: Resistors connected in series.
Resistors are connected in series when current flows through them one after another. The circuit above shows three resistors (R1, R2 and R3) connected in series and the direction of current (I) is indicated with an arrow to show the direction of flow of current through the circuit when a source voltage (E) is applied.
Since the current has only one path to travel, the current flowing through each of the resistors is the same.
I = I1 = I2 = I3 ————————— (1)
Where I is the total current flowing through the circuit and I1, I2 and I3 are the currents flowing through resistors R1, R2 and R3 respectively.
The sum of the voltage drops at R1, R2 and R3 is equal to the total voltage supplied by the source voltage (or battery).
V = V1 + V2 +V3 ————————- (2)
Where V is the applied voltage (or total circuit voltage) and V1, V2 and V3 are the voltage drops across R1, R2 and R3 respectively.
Since V = IR (Ohm’s law)
Then V = I1R1 + I2R2 + I3R3 ————- (3)
To satisfy Ohms law for the entire circuit,
V = IRequivalent —————————– (4)
Substituting (4) into (3), we get;
IRequivalent = I1R1 + I2R2 + I3R3 ————- (5)
Since the current through each of the resistors is equal to the total current, I1 , I2 and I3 can be represented by I
IRequivalent = I (R1 + R2 + R3) —————- (6)
By cancelling I from both sides of (6) we arrive at the expression for equivalent resistance for resistors connected in series.
Requivalent = R1 + R2 + R3 ——————— (7)
In general, the equivalent resistance of resistors connected in series is the sum of their resistances. That is;
Requivalent = ∑Ri ——————————– (8)
Example 1.
The circuit above shows three resistors connected in a circuit with an applied voltage of 10V. Calculate the equivalent resistance of the circuit.
Solution
Requivalent = R1 + R2 + R3
Where R1, R2 and R3 represents 5 kΩ, 7 kΩ and 1kΩ respectively.
Requivalent = 5+7+1
= 13 kΩ


